 Bridge
signals are designed for installation on our cantilevered signal
bridges, our bracket posts
(signal platform) or on any gantry or cantilevered signal bridge
that you may have purchased
elsewhere. We manufacture signal kits for bridges with the
following types of signal heads. All
types are supported on a short mast which is mounted on top
of the signal:
Type D- one, two or three color Type G – one or three
color
Type SA – searchlight type B&O and Pennsy types
Multiple heads – two or three of the above listed types
can be mounted on each mast.
Our bridge kits include:
• The signal head
• A short mast
• A finial (top cap)
• A service platform if more than one head is required
• A ladder to the service platform
• Brackets for mounting the head to the mast
• A pair of brackets or a flanged base to mount the mast
to the signal bridge
We sub-assemble the head mounting bracket to the short mast
and drill the hole in the mast or the
wires, if the position of the head is specified. The mounting
of the short mast to our bridge is left to
you, but we supply a pair of brackets and a flanged base. Bridge
signals are controlled in the
identical manner as out mast signals. |
